BluePrint Engines Ford 408 Windsor 425HP Stroker Dressed Engine # BPF4089CTCD
by Blue Print
# BPF4089CTCD
Ring for availability
Ring for availability!
AU $16,950.00
- Out of Stock
- Out of Stock
BluePrint Engines Ford 408 Windsor 425HP Stroker Dressed Engine # BPF4089CTCD
Comes With The Following Items
Edelbrock / Holley Intake Manifold
Holley 750cfm Carburetor
Electronic Distributor
Spark Plug Leads
Spark Plugs
Water Pump
Thermostat Housing
Balancer
Engine Specifications.
HP Torque: 450 HP / 470 FT LBSCompression Ratio: 9.8:1Aluminum HeadsHydraulic Roller CamCast Steel Crank
Forged Pistons
BLOCK:
Hand picked seasoned block
Square and parallel decked
Line honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Cylinders are Sonic tested for thickness
2-Bolt Main4.000" Bored
1-Piece Rear Main Seal
Mech fuel pump provision: yes
ROTATING ASSEMBLY:
New Cast steel crankshaft4.000" StrokeForged I-Beam 6.200" connecting rods
Forged Pistons
Internal Balance
CYLINDER HEADS:
BluePrint Aluminum Cylinder Heads -HP9009
60cc chamber
2.02" intake/1.60" exhaust valves
90cc intake/65cc exhaust runners
CAM SPECS:
Roller.579 Intake / .579 Exhaust236 Intake / 248 Exhaust duration @ .050 - 114 degree lobe separation
IGNITION TIMING:
34 degrees total at 3500 RPM
ALSO INCLUDES:
Oil pan, dipstick, timing cover and valve coversDyno tested and shipped with results
Comes With The Following Items
Edelbrock / Holley Intake Manifold
Holley 750cfm Carburetor
Electronic Distributor
Spark Plug Leads
Spark Plugs
Water Pump
Thermostat Housing
Balancer
Engine Specifications.
HP Torque: 450 HP / 470 FT LBSCompression Ratio: 9.8:1Aluminum HeadsHydraulic Roller CamCast Steel Crank
Forged Pistons
BLOCK:
Hand picked seasoned block
Square and parallel decked
Line honed main bearing bore
Cylinders honed on computer controlled machine to within .0002 straightness and roundness
Cylinders are Sonic tested for thickness
2-Bolt Main4.000" Bored
1-Piece Rear Main Seal
Mech fuel pump provision: yes
ROTATING ASSEMBLY:
New Cast steel crankshaft4.000" StrokeForged I-Beam 6.200" connecting rods
Forged Pistons
Internal Balance
CYLINDER HEADS:
BluePrint Aluminum Cylinder Heads -HP9009
60cc chamber
2.02" intake/1.60" exhaust valves
90cc intake/65cc exhaust runners
CAM SPECS:
Roller.579 Intake / .579 Exhaust236 Intake / 248 Exhaust duration @ .050 - 114 degree lobe separation
IGNITION TIMING:
34 degrees total at 3500 RPM
ALSO INCLUDES:
Oil pan, dipstick, timing cover and valve coversDyno tested and shipped with results