COMP CAMS VALVE SEAL .530" GUIDE , 11/32" VALVE STEM SET # CC518-16
by COMP Cams
# CC518-16
Only 3 left!
AU $55.00
- Limited Stock
- In Stock
COMP CAMS VALVE SEAL .530" GUIDE , 11/32" VALVE STEM SET # CC518-16
Valve Stem Seals, Viton, Positive Stop, .530 in. Guide, 0.344 in. Valve Stem, Set of 16
Valve Stem Diameter (in.):
0.344 in.
Valve Stem Diameter (mm):
8.74mm
Valve Stem Seal Type:
Positive stop
Valve Stem Seal Material:
Viton
Machine Work Required:
No
Valve Guide Diameter (in.):
0.530 in.
Valve Stem Seal Outside Diameter (in.):
0.575 in.
Quantity:
Sold as a set of 16.
Notes:
Designed for triple spring. Requires machining the top of the valve guide with a special .530 in. diameter cutter.
COMP Cams Valve Seals
COMP Cams offers a complete line of valve seals, from the stock GM O-rings to the positive-stop PTFE seals. They are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The O-ring seals use the standard retainer and oil splash shield. The umbrella seals are normally used when a larger-than-stock diameter spring is used. In the case of a double spring, the positive stop PTFE seals are used. For triple-spring applications, use the smaller-diameter Viton seals.
Valve Stem Seals, Viton, Positive Stop, .530 in. Guide, 0.344 in. Valve Stem, Set of 16
Valve Stem Diameter (in.):
0.344 in.
Valve Stem Diameter (mm):
8.74mm
Valve Stem Seal Type:
Positive stop
Valve Stem Seal Material:
Viton
Machine Work Required:
No
Valve Guide Diameter (in.):
0.530 in.
Valve Stem Seal Outside Diameter (in.):
0.575 in.
Quantity:
Sold as a set of 16.
Notes:
Designed for triple spring. Requires machining the top of the valve guide with a special .530 in. diameter cutter.
COMP Cams Valve Seals
COMP Cams offers a complete line of valve seals, from the stock GM O-rings to the positive-stop PTFE seals. They are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The O-ring seals use the standard retainer and oil splash shield. The umbrella seals are normally used when a larger-than-stock diameter spring is used. In the case of a double spring, the positive stop PTFE seals are used. For triple-spring applications, use the smaller-diameter Viton seals.