Ford C10 TCI StreetFighter Torque Converter 3000 - 3400 rpm 26 Spline # TCI451900
# TCI451900
Only 2 left!
AU $1,350.00
- Limited Stock
- In Stock
Ford C10 TCI StreetFighter Torque Converter 3000 - 3400 rpm 26 Spline # TCI451900
Torque Converter, Super StreetFighter, Ford, C-4, Each
Torque Converter Use:
Street/Strip
Stall Speed Rating RPM Range:
3,000-3,400
Torque Converter Bolt Circle (in.):
11.438 in.
Input Spline Quantity:
26
Anti-Ballooning Plate:
No
Lockup Compatible:
No
Diameter (in.):
10.000 in.
Crank Pilot Diameter:
1.375 in.
Furnace-Brazed:
Yes
Balanced:
Yes
Mounting Hardware Included:
Yes
Mounting Hardware Type:
7/16-20 studs and nuts
Mounting Hardware Quantity:
4
Torque Converter Stall Note:
Actual stall speed may differ due to engine combination, gear selection, and vehicle weight.
Quantity:
Sold individually.
Notes:
Fits applications with dipstick mounted into the transmission pan.
TCI StreetFighter Torque Converters
These TCI StreetFighter converters are completely remanufactured with furnace-brazed fins, needle bearings, and a flame-hardened hub. StreetFighter converters will give you about a 3,000 to 3,500 rpm stall speed. They're recommended for use on high-compression street/strip engines and higher performance cars and are used on some of the fastest street machines the world over. Plus, some applications are available with an anti-ballooning plate for use on vehicles equipped with nitrous oxide.
Torque Converter, Super StreetFighter, Ford, C-4, Each
Torque Converter Use:
Street/Strip
Stall Speed Rating RPM Range:
3,000-3,400
Torque Converter Bolt Circle (in.):
11.438 in.
Input Spline Quantity:
26
Anti-Ballooning Plate:
No
Lockup Compatible:
No
Diameter (in.):
10.000 in.
Crank Pilot Diameter:
1.375 in.
Furnace-Brazed:
Yes
Balanced:
Yes
Mounting Hardware Included:
Yes
Mounting Hardware Type:
7/16-20 studs and nuts
Mounting Hardware Quantity:
4
Torque Converter Stall Note:
Actual stall speed may differ due to engine combination, gear selection, and vehicle weight.
Quantity:
Sold individually.
Notes:
Fits applications with dipstick mounted into the transmission pan.
TCI StreetFighter Torque Converters
These TCI StreetFighter converters are completely remanufactured with furnace-brazed fins, needle bearings, and a flame-hardened hub. StreetFighter converters will give you about a 3,000 to 3,500 rpm stall speed. They're recommended for use on high-compression street/strip engines and higher performance cars and are used on some of the fastest street machines the world over. Plus, some applications are available with an anti-ballooning plate for use on vehicles equipped with nitrous oxide.